Canton Smart Sounddeck 100 User Manual

3
41
English
To set the radio channel of the wireless audio module to a fix channel or to automatic selection please do as follows:
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate to the menu Wireless Setup [WIS] and confirm with the "OK" button.
3
Use the " " or " " button to select the item RF Channel [CHN] and confirm with "OK".
4
Select the desired radio channel (see above) using the "+" or "–" key and confirm your selection by pressing "OK".
5
Press the "M" button to exit this menu item.
Bluetooth [BT]
At this menu you can set all features relating to the Bluetooth
®
wireless technology module integrated into the Smart Sounddeck 100.
The Bluetooth menu includes four submenus, as follows:
BT Pairing [BTP]
This menu allows you to set whether the Sounddeck 100 sends a pairing request to (mobile) devices permanently at the mode Auto
[AUT], or whether this has to be done manually via the Bluetooth
®
pairing button on the remote control when using the mode Manual
[MAN] to avoid unwanted pairings. As factory default this function is deactivated (Manual [MAN]).
To change the way in which the paring process is initiated please proceed as follows:
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate to the menu Wireless Setup [WIS] and confirm with the "OK" button.
3
Use the " " or " " button to select the menu item Bluetooth [BT] and confirm with the "OK" button.
4
Confirm the first the menu item Pair Mode [BTP] by pressing the "OK" button.
5
Select the desired parameter [MAN] resp. [AUT] using the "+" or "-" key, then press the"OK" button, again.
[AUT] = The device permanentely sends pairing requests (Auto mode).
[MAN] = The pairing process is activated by pressing the "BT Pairing" button on the remote.
6
Press the "M" button to exit this menu item.
Note: • If a signal is being transmitted via Bluetooth® wireless technology, the Sounddeck 100 does not send a pairing request to a
second (mobile) device, even if the automatic mode Auto [AUT] is selected.
• If the input Bluetooth is not selected, neither automatic nor manual pairing is possible. To achieve pairing independent of the
selected input, the BT Select [BTS] function must be set to automatic (please refer to the next chapter).
• Please find the requirements for a successful pairing in the chapter "Playback via Bluetooth® wireless technology".

Canton Smart Sounddeck 100 Specifications

General

Audio decoders	Dolby Atmos
RMS rated power	- W
Audio output channels	- channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDCP version	2.2
HDMI ports quantity	4
Connectivity technology	Wired
Product color	Black
Wall mountable	No
Audio formats supported	DTS

Weight and Dimensions

Width	- mm
Soundbar weight	- g