Before You Begin
CardScan User’s Guide 2-1
Chapter 2 Installing CardScan
To begin using CardScan quickly, you should follow the installation and setup
sequences presented in this chapter. This chapter includes:
• Before you begin
• Installation and setup
• If upgrading from a previous version
Before You Begin
Before you begin to install the Cardscan software, do the following:
1. Make sure you have the following:
• Windows 98 or later
• Pentium processor or later
• 64 MB of RAM
• 50 MB free hard disk space for a minimum installation and 110 MB for a
full installation
• CD-ROM drive
• USB port for scanner connection
• Modem for autodialing (optional)
• Windows-compatible network for multiple users
• Mouse, or other pointing device, recommended
2. If running Windows 2000, Windows NT, Windows XP, or later, log on as
Administrator or to an account with Administrator privileges.
3. Locate your software serial number in the CD-ROM package.
4. To use CardScan with Palm
or Pocket PC devices, install the desktop
software for these devices before installing CardScan.
Keywords: “Palm”, “Pocket PC”
5. If upgrading from a previous version, see “If a Previous Version is
Installed” on page 2-4.
To Next Page
Loading...
