CardScan 600c - Manual Synchronization; Synchronizing One File; Synchronizing All Files

Chapter 6 Maximizing Your Contact Potential with CardScan.Net
6-4 Corex Technologies
1
The Conflict Detected dialog specifies the type of conflict, and asks you to
choose a resolution.To apply the chosen resolution to all conflicts of this type
during the current synchronization, choose the option at the bottom of the
dialog.
When a conflict involves a deleted contact, the option for creating
duplicates is unavailable. Therefore, if deleting a contact was
erroneous, choose the resolution that restores the contact.
If you use Automatic synchronization, it will always apply the resolution
specified in the settings (see page 6-5).
Manual Synchronization
Manual synchronization includes two options:
• Synchronize one file.
• Synchronize all files in the CardScan.Net account.
Synchronizing One File
To synchronize one file:
1. Open the file. (If more than one file is open, click on the file to
synchronize.)
2. Choose CardScan.Net→Synchronize “filename”.
Synchronizing All Files
If you use manual (rather than automatic) synchronization, you can
synchronize all CardScan.Net-enabled files. To synchronize all files:
1. Open CardScan.
2. Choose CardScan.Net→Synchronize All Files.
NOTE: You don’t have to open all your files to synchronize them
simultaneously.
If during synchronization a conflict occurs, resolve it as described in
Conflict
Resolution
on page 6-3.