17
rel. 2.7 - 16.11.2018
ENG
"Passive probes" +030220658 -
4. NTC PIERCING PROBE TECHNICAL SPECIFICATIONS
4.1 Models NTC*INF*
Piercing probes with 90° e 180° handle
Storage conditions -50T90 °C
Operating range -50T90 °C
Connections Stripped ends, dimensions: 5±1 mm
Sensor NTC 10 kOhm ±1% at 25 °C Beta 3435
Dissipation factor (in air) approx. 2.2 mW/°C
Thermal constant over time (in air) approx. 45 s
Cable Two-wire with double sheath, tinned copper wire size 0.35 mm2 with electrical resistance ≤63
Ohm/km
Sensitive element index of protection IP67
Sensitive element housing AISI 304 stainless steel with silicone resin filling
Classification according to protection against electric shock
(sensitive element and cable)
Insulation: silicone both on outer sheath and inside on wires
Category of resistance to heat and fire Flame retardant
Food compatibility Suitable for permanent food contact
Tab. 4.a
NTCINF600*
40
90
Ø 9
150
Ø 5
6000
Fig. 4.a
NTCINF610*
225
169
8
4
36
13
137L= *
Fig. 4.b
* = see table of product codes in price list
To Next Page
Loading...
