Need help?Do you have a question about the Carestream DRYVIEW 5950 and is the answer not in the manual?
Explains the fundamental operation of the laser imaging system and how it processes images.
Covers turning the imager on/off, power switch location, and startup procedures.
Provides instructions on how to restart the imager to clear errors.
Details automatic and manual calibration processes for ensuring print quality.
Provides a summary of status indicators, error messages, and their meanings.
Guidance on recognizing and resolving calibration failure errors.
Steps for identifying and clearing film jams from the imager.
Interprets codes and messages related to various subsystems of the imager.
Lists and explains various condition codes displayed by the imager.
Illustrates jam locations and provides guidance for clearing film jams in specific areas.
Procedure to clear a film jam indicated by code 116 in Area 1.
Procedure to clear a film jam indicated by code 323 in Area 2.
Procedure to clear a film jam indicated by code 324 or 325 in Area 2.
Procedure to clear a film jam indicated by code 326 in Area 2 or 3.
Procedure to clear a film jam indicated by code 543 in Area 3.
Procedure to clear a film jam indicated by code 544 in Area 3.
Troubleshooting steps for when the imager's display screen is unresponsive.
General| Category | All in One Printer |
|---|---|
| Print Technology | Dry Laser Imaging |
| Grayscale Levels | 4096 |
| Film Sizes | 8x10, 10x12, 11x14, 14x14, 14x17 inches |
| Media Size | 8x10, 10x12, 11x14, 14x14, 14x17 inches |
| Network Interface | Ethernet |
| Connectivity | Ethernet |
| Power Requirements | 100-240 VAC, 50/60 Hz |
To Next Page