Maintenance and Troubleshooting
AA2204_en | 2012-07-27 3–11
Film Cartridge
Printing Power symbol is
green and flashing
Printing NORMAL The imager is currently
printing films.
Ready Power symbol is
green
Film count displays
Ready NORMAL The imager is online and
the processor has reached
operating temperature.
Self-test Power symbol is
yellow and
flashing
Code and film
count are replaced
by dashes
Self-test WARNING /
PRINTER INIT
This occurs when power
is first applied to the
imager.
Service
Mode
Status code: 700
Power symbol is
yellow
20700:
Service
Mode
WARNING /
PRINTER
OFFLINE
The service switch is
enabled. The imager is
not ready to print.
Warming Power symbol is
yellow and
flashing
Number of
minutes count
down until ready
Warming=xx WARNING /
PROC INIT
The processor is warming
up and will not be ready
to print for xx minutes.
Printer
Status Display Screen Web Portal DICOM Status Description
Film
Cartridge
State Display Screen Web Portal Description
Failed Power symbol is yellow
Pause and Calibrate
symbols are off
Film count is replaced by
dashes
Failed An error has occurred that
affects normal operation. This
film cartridge is currently not
usable. Reinsert the cartridge. If
error reoccurs, insert a new film
cartridge.
Calibrating Power symbol is green and
flashing
Pause symbol is on
Calibrate symbol is blue
and flashing
Calibrating A calibration is in progress for
the film cartridge.
To Next Page
Loading...