AA2204_en | 2012-07-27 2–1
2
Basic Operating Tasks
During normal operation, the imager receives and automatically prints images sent by
modalities over a network. Very little interaction is required. You can do the following:
• Turn the power on (|) and off (0).
• Load the film cartridges.
• Monitor the display screen for status and operating conditions.
Sometimes it will be necessary to perform preventive maintenance, filter replacement,
and other corrective actions such as a restart.
You also may access the Web Portal to perform additional configuration, optimize image
quality, or do troubleshooting tasks.
Related topics
Maintenance and Troubleshooting
Access More Functionality with the Web Portal
To Next Page
Loading...