Maintenance and Troubleshooting
3–14 AA2204_en | 2012-07-27
Condition Codes
Condition codes are shown on the display screen in the order in which they are
generated. If there is more than one code associated with the current condition of the
imager, the first code is shown on the display screen for six seconds, while other codes in
the list display for three seconds as the list is cycled. You can also view these codes and
messages at the Web Portal.
Display
Screen
Web
Portal
Web Portal
Message Action
004 01004 MIM Core: Internal
Software Error
Restart the imager.
If the error persists, call for service.
200 04200 MIM Core: Disk Full Load the requested film type and size for jobs
that are waiting for media.
If the error persists, call for service.
400 06400 MIM Core: Image
Page Error
Resend the print job from the image source.
If the error persists, call for service.
410 06410 MIM Core: Image
Rendering Error
Resend the print job from the image source.
If the error persists, call for service.
411 06411 MIM Core: Image
Data Error
Resend the print job from the image source.
If the error persists, call for service.
420 06420 MIM Core: Internal
Software Error
Resend the print job from the image source.
If the error persists, call for service.
430 06430 MIM Core: Internal
Software Error
Resend the print job from the image source.
If the error persists, call for service.
001 10001 MIS: Internal
Software Error
Restart the imager.
If the error persists, call for service.
003 10003 MIS: Image Buffer
Error
Restart the imager.
If the error persists, call for service.
015 10015 MIS: Database Error Restart the imager.
If the error persists, call for service.
910 10910 MIS: MCS
Communication
Failure
Restart the imager.
If the error persists, call for service.
006 20006 Disconnected or
faulty network cable
Check and reconnect the network cable on both
ends.
If the error persists, call for service.
To Next Page
Loading...