Overview
AA2204_en | 2012-07-27 1–3
6 Rollback assemblies (upper and lower). Roll the film cartridge cover back so the
pickup assembly can lift the film. When the imager is not printing, the cover is closed
over the film cartridge to protect the film from light.
7 Feed rollers. Move the film through the imager.
8 Pickup assemblies (upper and lower). Lift a single sheet of film from the supply
cartridge and feed it into the rollers.
9 Transport guides. Orient and center the film while moving the film from the supply to
the imaging portion of the imager.
10 Exposure transport. Moves the film past the scanning laser beam.
11 Processor drum. Provides the heat that processes the image on the film.
To Next Page
Loading...