Carrier CCU - Page 48

Unit 1
ENTER
1 Operating info
ENTER
With no fault, the temperature, humidity, setpoints
and unit state on the master/slave connection are
displayed
With a fault, the type of fault is displayed along with
its solution (reset button to cancel after resolution)
0
Back to menu
2 Fault memory
ENTER
List of the last 20 timestamped faults. To view the
state of the machine at the time of the fault, select the
fault with the cursors and hit ENTER
0
Back to menu
3 Parameters
ENTER
3.1 Unit
type
3.2 Control and
settings
3.3 Reading
parameters
P01
P99
P100
P249
P250
P599
Machine
conguration
0
Back to menu
4 Help
ENTER
4.1
Troubleshooting
help
4.2 Console help
4.3 Maintenance
Help information
0
Back to menu
3 - MENU TREE
48