To set up the driver
Zone Ctrl II and
VAV Zone II Secondary Duct Installation and Start-up Guide CARRIER CORPORATION ©2019
Error! No text of specified style in document.
39 All rights reserved
Calendars are provided in the driver for BACnet compatibility only. Instead, use the
feature in the i-Vu®
interface.
On these pages, you can enable/disable, change BACnet alarm properties, or set delays for the following BACnet
alarms:
• All Programs Stopped
• Duplicate Address
• Locked I/O
• Control Program
• Program Stopped
•
Short message shown on the i-Vu®
page or in an alarm action when this
type of alarm is generated.
Alarm Category and Alarm
Template
See Alarms in i-Vu® Help.
Clear these checkboxes to disable Alarm or Return to normal messages of this
type from this controller.
Do not change this field.