SHANDONG CARTER HEAVY INDUSTRY MACHINERY CO., LTD.
7
1.1.3 Compliance with safety regulations
(a)Read and observe all safety signs carefully, machine and this manual
all safety relate dissues in the safety signs marked on the machine and
in this manual.
(b) When necessary, installation, maintenance and replacement of
safety signs.
(c) If the safety signs or the manual is damaged or lost, by an order like the same method ordering spare parts to
the specified sellers and CARTER Heavy for ordering them (Order required specifying the model and serial
number of the machine).
(d) Learning to operate and control the machine safely and correctly.
(e) Only trained and qualified personnel can be allowed to operate the machine.
(f) Keeping the machine in a suitable working conditions
(g) Make unauthorized modifications of the machine may be detrimental to its function and (or) security, and
affect the life of the machine.
(h) The safety instructions in the "Security" chapter are basic safety instructions of the machine. However, these
safety instructions don’t involve all the dangerous situations you may encounter. If have any doubt, please contact
with you specifies dealer or CARTER service engineer firstly before operating and maintaining of machinery.
1. Understand the safety equipment
(a) Ensure that all guards and cover are in the appropriate location. If the guards and the cover are damaged, please
repair them immediately.
(b)Understand the method of using the safety device and use it correctly
(c) Do not remove any safety devices, and to ensure that they remain in good working condition.
2. Keep machine clean
(a) If there is water in the electrical system it could cause the machine failure. Do not use water or the steam to
flush electrical system such as sensors, connectors
(b) When checking or maintenance, if the machine with mud or oil, it may result in the risk of slipping, falling and
harming eye by dirty things. So please keep the machine clean.
3. Keep cabin in clean
(a)When entering the cabin, be sure to remove dirt and grease under the shoes. The operation of the pedal with the
shoes carrying mud or oil, the foot will slip which could cause a serious accident.
(b) Do not leave parts or tools in the cabin.
(c) Do not stick suction pad to the glass. Suction pad play the role of magnifying function, it may cause a fire.
(d) When driving or operating machinery, do not use a mobile phone in the cabin.
(e) Dangerous goods (such as flammable or explosive materials) should not take into the cabin.
4.To leave the seat in a locked condition
(a)Operator stood up from the seat, such as adjust the seat, has
to make the work unit is completely lowered to the ground, the
To Next Page
Loading...