SHANDONG CARTER HEAVY INDUSTRY MACHINERY CO., LTD.
19
explosion or loss of control of the machine.
(d) To avoid machine equipped with crew
Only allow the operator on the machine, do not allow
other multiply member.
The crew will also block the vision of the operator, resulting
the unsafety of the operation.
The crew on the machine is vulnerable to injuries, for example, hit by foreign objects or thrown from the machine.
The decorative Vice seat in the cabin allows equipped with a ride staff.
1.2.2 After starting the engine
1. After starting the engine check
(a) When doing inspection, moves the machine to a wide area without any obstacle, and slowly operates the machine,
does not allow anyone close to the machine.
Who operate close to the machine?
(b) Be sure to fasten your seat belt.
(c) Inspect the operation of instruments and equipment is functioning properly, and check the bucket, stick, boom,
travel system, rotary system. And the steering system is operating correctly.
(d) Check the machine's sound, vibration, heat, smell or instrument whether there is abnormal, check the oil or fuel
leaks.
(e) If any abnormality is found, to be repaired immediately.
(f) To be maintenance, switch the safe operation lever to the LOCK position and suspension overhaul signage.
2. Machine direction
In the present specification, front, rear, left and right refer to the
cabin when facing the front,and the drive wheels in the rear of the
machine, when the traveling direction as seen from the cabin.
3. Confirm the direction of travel of the machine
To Next Page
Loading...