SHANDONG CARTER HEAVY INDUSTRY MACHINERY CO., LTD.
56
4.4 Operational Precautions
4.4.1 Safety Button operation
Optional:May increase according to the customer request
Push button switch
1. Before starting the engine, it is necessary to put the warping O of SAFE button in Figure 1 in a press state, otherwise
the engine cannot be started to prevent safety accidents caused by misstart.
2. After starting, the whole machine is in a no-action state before working. The warping I of SAFE button in Figure 1
should be pressed and the vehicle can work. Before extinguishing, the warping O of the SAFE button in Figure 1 should
be pressed to prevent safety accidents caused by misaction.
Safety control lever:
1.Before starting the engine, it is necessary to turn the safety control lever to the vertical direction, otherwise the engine
cannot be started, to prevent the safety accidents caused by the misstart.
2.After starting, the whole machine is in a no-action state before working. The safety lever needs to be turned to the
horizontal direction, and the whole vehicle can work. Before flameout, it is necessary to turn the safety lever to the
vertical direction to prevent safety accidents caused by misaction.
Safety control
lever
To Next Page
Loading...