SHANDONG CARTER HEAVY INDUSTRY MACHINERY CO., LTD.
66
External meshing gear 93 of slewing bearing every 100h
Lower the bucket onto the ground
Turn off the engine
1. Park machine on the flat ground.
2. Lower the bucket onto ground.
3. Idle engine at low speed for 5min.
4. Turn the ignition switch to OFF and then take off the key.
5. The grease has to be stored on the top of external meshing gear of slewing bearing, free of any pollution. Add approximate 0.5kg
of grease if needed.
Any polluted grease should be replaced with new one.
5.4.3 Engine oil
Parts Quantity
Interval (h)
20
50 100 250 500 1000 2000
Engine oil
1
●
▲
Engine oil filter
1
●
▲
To Next Page
Loading...