EasyManua.ls Logo

Carter CT12 - Page 70

Carter CT12
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SHANDONG CARTER HEAVY INDUSTRY MACHINERY CO., LTD.
67
According to the temperature range during the interval, select the viscosity of oil listed in the table below:
Recommended engine oil brand: 15W—40 engine oil
Inspection of engine oil level ―――-each day
Change of engine oil ―――every 250 h Change
the engine oil filter ―――every 250 h
1.
Start up engine to preheat up engine oil properly.
2.
Park the vehicle on the flat ground.
3. Lower the bucket onto the ground.
4.
Idle engine at low speed for 5min.
5.
Turn the ignition switch to OFF and then take off the key.
6.
Take off the drain plug to have oil pass through clean cloth into the 2L container.
7.
After that, check if there is metal scrap or others left on cloth.
8. Put the drain plug back on and tighten it
9.
Loosen the drain plug to have oil flow through the filter cylinder into a container.
10. Take off the screws fixing the engine oil filter elements with a screwdriver to take the filter elementout.
11.
Reinstall the new filter and tighten the screws fixing the new element with a screwdriver.

Table of Contents