SHANDONG CARTER HEAVY INDUSTRY MACHINERY CO., LTD.
3
UK DECLARATION OF CONFORMITY
ACCORDING TO THE FOLLOWING UK REGULATIONS
1.1THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS 2008 (AS AMENDED)
1.2ELECTROMAGNETIC COMPATIBILITY REGULATIONS 2016 (AS AMENDED)
1.3 THE NOISE EMISSION IN THE ENVIRONMENT BY EQUIPMENT FOR USE OUTDOORS
REGULATIONS 2001 (AS AMENDED)
THE UNDERSIGNED, CHANGJIN LIU, REPRESENTING SHANDONG CARTER HEAVY INDUSTRY
MACHINERY CO., LTD. / ECONOMIC TECHNOLOGY DEVELOPMENT PARK, LINSHU, SHANDONG,
P.R.CHINA, DECLARES THAT THE MACHINE DESCRIBED HEREAFTER:
PRODUCT NAME: HYDRAULIC EXCAVATOR
COMPLY WITH THE RELEVANT PROVISIONS OF REGULATION 2008, PROVIDED THAT IT ISUSED
AND MAINTAINED IN ACCORDANCE WITH THE GENERAL ACCEPTED CODES OF GOOD
PRACTICE AND THE RECOMMENDATIONS OF THE INSTRUCTION MANUAL.
PERSON AUTHORISED TO COMPILE THE TECHNICAL FILE:
CARTER DIGGERS UK AND NI LIMITED
HENALLT FAWR, BRONWYDD ARMS, CARMARTHEN, CARMARTHENSHIRE, SA33 6BB, UNITED
KINGDOM
FOR THE MOST SPECIFIC RISKS OF THIS MACHINE, SAFETY AND COMPLIANCE WITH
THE ESSENTIAL REQUIREMENTS OF THE REGULATION HAS BEEN BASED ON
ELEMENTS OF:
2.1 EN ISO 12100:2010 SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN -
RISK ASSESSMENT AND RISK REDUCTION
2.2 EN 474-1:2006+A6:2019 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL
REQUIREMENTS
2.3 EN 474-5:2006+A3:2013 EARTH-MOVING MACHINERY - SAFETY - PART 5:
REQUIREMENTS FOR HYDRAULIC EXCAVATORS
DATE:
PLACE:
STAMP&SIGNATURE
TITLE
To Next Page
Loading...