SHANDONG CARTER HEAVY INDUSTRY MACHINERY CO., LTD.
11
specify a signalman to organize the job,while ensuring that all workers
obey the command.
18. Signalman signals and gestures
(a) To set the flag on the shoulder or soft ground. If the vision
is not good, if necessary, arrange for a signalman command.
The operator should pay particular attention to the signs, and
obey the command of the signalman.
(b) Only signaled by one signalman.
(c) Before starting work, ensure that all operators are aware of
all signals and gestures.
19. Keep away from rotating parts
(a) It maybe results in serious injury if caught in moving parts.
(b) Working next to the rotating member, need to be very careful of
hands and legs, clothes, jewelry and hair so that will not rotating
member involvement.
20. Prevent parts flying out
The track adjusters grease usually in the high pressure, if not avoided
the following precautions may result in serious injury, blindness or
death.
(a)Do not remove the grease fitting or valve parts.
(b)Parts could come out of, so the body and face should be away from
the valve body.
(c) Walking reducer with pressure.
(d) As part could come out, so the body and face must be away from the
air drain plugs, to avoid injury.
(e)Because the gear oil is hot, gradually release air emissions tied to
wait for gear oil cooling, the pressure was released.
21. Prevent falling objects, flying objects and invader
(a)Falling objects, flying objects and invader hit or enter the driving
cabin dangerous workplaces, depending on the operating conditions;
security mounted the necessary shield to protect operating personnel.
(b) When the removal or crushing operation, to install the front shield,
and posted the front glass transparent cellophane.
(c) When the risk of falling rock mine or quarry operations, to install
FOPS (Falling Object Protective Structure) and the front shield and
posted in the glass transparent cellophane.
(d) Above described is for typical conditions, according to the site
operation, you may need to install other guard. When any part of the
protection structure, like ROPS, FOPS, and TOPS (rollover protection
To Next Page
Loading...