SHANDONG CARTER HEAVY INDUSTRY MACHINERY CO., LTD.
28
(b) Loading and unloading the machine, please note the following:
Select a firm level ground.
Be sure to use the loading dock or slope.
When loading or unloading machinery, there must be a
signalman.
Loading and unloading machine, you must turn off the auto-
idle switch to avoid the operating lever accidental operation
and cause a sudden increase in speed.
Switch to select slow walking.Fast walking ,speed will
automatically increase.
If you need to turn the machine,you should be directed back
to the ground or car plate, then onto the slope correction
direction.
In addition to the travel lever onto or driving under the
slope, do not operate any other joystick.
The top of the slope and flat relative to the Survey Office
was convex, care should be taken to passing.
Rotary car to prevent injuries may cause the machine to tip
over.
Keep the arm pulling and slowly turn the car in order to get
the best stability.
Chain or rope to hold the machine frame. For more
information, see the "Transport" chapter.
19.Prohibition the lifting
Hanging objects falling around may be hit by falling objects or
suppress, resulting in serious injury or death.In order to prevent
accidents, in any case, prohibition lifting.
Prohibit hanging grasping logs, etc.
Prohibit hanging grasping logs, etc.
To Next Page
Loading...