CAS CI-100A - TARE;PRESET Key Functions; ZERO;ON;OFF Key Functions

CI-100A Indicator Operation & Service Manual
────────────────────────────────────────────────────────
CAS-USA Corporation
www.cas-usa.com 8
Display voltage mode,
press down >3s
To calibrate input voltage value
Display ADC code Select displaying code from no-filter, filter1, filter2
Input data mode Rotate the flashed position from left to right
TARE
PRESET
Weighing/Counting/Percent ,
press down <3s
Tare function
Weighing/Counting/Percent ,
press down > 3s
To input pre-set tare weight at selected weight unit
input data mode or
Menu selection mode
To confirm input data or current item selection, and go to
next item of current menu, or next operation
Display ADC code Set or clear “tare” code
ZERO
ON/OFF
Power off mode Power on
Weighing/Counting/Percent,
press down <3s
Zero function
Weighing/Counting/Percent,
press down > 3s
Power off
Input data mode ignore modification
Menu selection mode Prepare to exit from current working mode
Note:
Normally, the second function of one key need pressing it down more than 3s.