DISTRIBUTION SYSTEMS - ELECTRICA L POWE R SYSTEM
4. Install the bearing retainer on the rotor shaft.
B8971429M 4
5. Press the new
front bearing onto the rotor s haft until
the front bearing stops moving.
B8971435M 5
6. Press the spacer onto the rotor shaft until the spacer
stops moving.
B8971504M 6
7. Press the new rear b earing onto the other end of
the rot
or shaft.
B8971505M 7
1 04/05/2005
A.30.A / 88
To Next Page
Loading...
