Case 435 - Turn;Hazard Light Diode - Testing (A.40.A.13.81 - G.40.A.20); 435, 445, 445 Ct

DISTRIBUTION SYSTEMS - LIGHTING S YSTEM
Turn/hazard light Diode - Testing (A.40.A.13.81 - G.40.A.20)
435, 445, 445CT
NOTE: For wiring diagram refer to Wiring harness - Electrical schematic frame 20 (A.30.A.88 - C.20.E.20)
Wiring harne ss - Electrical sc hematic frame 08 (A.30.A.88 - C.20. E.08)
N°
Te st Point Expected Result
Other Result (Possible Cause)
1
Disconnect the diode from the
connector.
With the voltmeter set to the DIODE
TEST setting, check between the
terminals of the diode.
Continuity in on e directio n only.
Bad diode.
1 04/05/2005
A.40.A / 5