E-14
NYC :New York, Detroit, Miami, Boston, Montreal
CHI :
Chicago, Houston, Dallas/Fort Worth, New Orleans, Winnipeg, Mexico City
DEN :Denver, El Paso, Edmonton, Culiacan
LAX :Los Angeles, San Francisco, Las Vegas, Seattle/Tacoma,
Vancouver, Tijuana
3. Press E to exit the setting screen.
• Normally, your watch should show the correct time as soon as you select
your Home City code. If it does not, it should adjust automatically after the
next auto receive operation (in the middle of the night). You also can
perform manual receive (page E-25) or you can set the time manually
(page E-117).
• The watch will receive the time calibration signal automatically from the
applicable transmitter (in the middle of the night) and update its settings
accordingly. For information about the relationship between city codes and
transmitters, see page E-18 and “Transmitters” (page E-131).
• See the maps under “Approximate Reception Ranges” (page E-19) for
information about the reception ranges of the watch.
• You can disable time signal reception, if you want. See “To turn auto receive
on and off” on page E-27 for more information.
To Next Page
Loading...
