E-50
To find the bearing to an objective
1. Set the map so its northerly indication is
aligned with north as indicated by the watch,
and determine your current location.
• See “To set a map and find your current
location” on page E-49 for information about
how to perform the above step.
2. Set the map so the direction you want to travel
on the map is pointed straight in front of you.
3. With the watch on your wrist, position it so the
face is horizontal.
4. In the Timekeeping, Digital Compass,
Barometer/Thermometer, or Altimeter Mode,
press C to take a compass reading.
• The reading will appear on the display after
about two seconds.
5. Still holding the map in front of you, turn your
body until north as indicated by the watch and
the northerly direction on the map are aligned.
12 o’clock
position
N
N
Current
location
Objective
To Next Page
Loading...
