E-46
Bearing Memory
Bearing Memory lets you store a direction
reading and display that reading as you take
subsequent readings.
The Bearing Memory screen displays the
direction angle for the stored direction, along with
an indicator in the ring around the display that
also indicates the stored direction. When you take
compass readings while the Bearing Memory
screen is on the display, the direction angle for
your current bearing (as read from the 12 o’clock
position of the watch) is also shown.
To store a compass reading in Bearing
Memory
1. In the Digital Compass Mode, press C to
take a reading.
•
After the compass reading is complete, the
watch will continue to take direction angle
readings automatically for about 20 seconds.
12 o’clock
position
Bearing Memory
indicator
Bearing Memory
direction angle
Direction angle of
current reading
Bearing Memory
Screen
To Next Page
Loading...
