E-71
• Once you start a save session, measurement continues to be
performed, and the REC indicator flashes on the display, even if you
change to another mode.
3. To stop an ongoing save session, hold down A for about one second until
REC disappears from the screen.
• The save session also will stop automatically when Periodic Record 40 is
stored.
• The watch updates the historical record continually while an altitude
measurement operation is in progress. See “Historical Record” on page
E-75 for more information.
• You can recall saved records using the Data Recall Mode (page E-83).
Periodic Records
Periodic records of up to 40 altitude readings are taken during a save session
(page E-70).
• You can use the Data Recall Mode (page E-83) to view these records.
To Next Page
Loading...
