E-48
After the settings are the way you want, push the crown back in to return to the 5.
Timekeeping Mode. Next, lock the crown.
Rotating the ring without pushing it down as far as it will go will change the •
settings of the watch. When locking the crown, be sure to press down firmly on
the ring as you rotate it.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
The time calibration signals transmitted from Mainflingen (Germany), Anthorn
(England), or Fort Collins (the United States) include both Standard Time and DST
data.
Note that an • AT setting (STD-AT or DST-AT) will be indicated only if the currently
selected city code is one that supports time calibration signal reception. While
AT is selected, the watch will switch between STD and DST automatically in
accordance with time calibration signal data.
To Next Page
Loading...
