E-49
STD-AT
When a transmitted daylight saving time signal is received, switches to
daylight saving time (DST-AT) automatically.
DST-AT
When a transmitted standard time signal is received, switches to standard
time (STD-AT) automatically.
STD
Even if a transmitted daylight saving time signal is received, standard time
(STD) setting does not change.
DST
Even if a transmitted standard time signal is received, daylight saving time
(DST) setting is not changed.
The initial default setting is • STD-AT when any one of the following city codes is
selected as the Home City code: LON (LONDON), PAR (PARIS), ATH (ATHENS),
NYC (NEW YORK), CHI (CHICAGO), DEN (DENVER), LAX (LOS ANGELES), ANC
(ANCHORAGE), or TYO (TOKYO).
For information about manually overriding the time calibration STD/DST setting, see •
“To manually override a time calibration standard time/daylight saving time setting”
(page E-53).
To Next Page
Loading...
