E-92
After confirming that the 7. x Second Hand is at the proper home position, press B.
This will advance to day home position adjustment.
The •
n Day is in the correct home position if it shows 1. If it doesn’t, rotate the
crown to change the day to 1.
Push the crown back in to return to the Timekeeping Mode. Next, lock the crown.8.
This will cause the hands to return to their normal positions and resume regular •
timekeeping. Wait until everything stops moving before performing any other
operation.
Rotating the ring without pushing it down as far as it will go will change the •
settings of the watch. When locking the crown, be sure to press down firmly on
the ring as you rotate it.
To Next Page
Loading...
