EN-101
Using the MIDI Recorder to Record
• Performing this procedure deletes the measures in the
specified range, shifting the measures following the deleted
range forward to fill in the space that is created. The total
number of measures in the song is reduced by the number
of measures that are deleted.
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-99).
2.
Press the [6] (ENTER) bm number key.
This displays “Clear”.
3.
Use the [1] (V) and [3] (W) bm number keys
to display “Delete”, and then press [6]
(ENTER).
This displays “Point A”.
4.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to delete, and then press [6] (ENTER).
This displays “Point B”.
5.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to delete, and then press [6] (ENTER).
This displays “Sure?”
6.
Perform the procedure under “To exit the Song
Editing Mode operation” (page EN-99).
The editing operations in this section affect an entire track in a
recorded song.
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-99).
2.
Use the [1] (V) and [3] (W) bm number keys
to display “WholeTrk”, and then press [6]
(ENTER).
This displays “Clear”.
3.
Press [6] (ENTER) again.
This displays “Trk Sy”
4.
Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays “Sure?”
5.
Perform the procedure under “To exit the Song
Editing Mode operation” (page EN-99).
To delete a specific range of measures from a
song
Editing a Recorded Song in Track
Units
To delete a specified track
CTX5000_3000_EN.book 101 ページ ２０１８年２月２６日 月曜日 午後３時５６分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
