EN-121
USB Flash Drive
You can use Digital Keyboard operations to perform data
storage, data import, data delete, and data renaming
operations for a USB flash drive plugged into the Digital
Keyboard.
These operations can be performed on the data listed below.
• User tones created with the Digital Keyboard
• User rhythms created with the Digital Keyboard
• Songs recorded with the Digital Keyboard’s MIDI recorder
• Setup data registered with the Digital Keyboard’s
registration function
• User phrases recorded to Digital Keyboard phrase pads
■ Sub Menu/File Name Extension List
The table below shows the sub-menus that are used for the
operations described in this section, and the file name
extensions for data types.
1.
Insert the USB flash drive into the Digital
Keyboard’s USB flash drive port.
2.
Press bk FUNCTION.
3.
Use the [1] (V) and [3] (W) bm number keys
to display “Media”, and then press [6] (ENTER).
4.
Use the [1] (V) and [3] (W) keys to display
“Save”, and then press [6] (ENTER).
5.
Use the [1] (V) and [3] (W) keys to display a
sub-menu of options that correspond to the
type of data being saved.
• See “Sub Menu/File Name Extension List” (above).
6.
Press [6] (ENTER).
• If “All Data” is selected in step 5, step 7 is not required.
Proceed to step 8.
7.
Use bn [–] and [+] or the bl dial to select the
data to be saved, and then press [6] (ENTER).
8.
Input the file name you want to use.
• See “Text Character Input” (page EN-15) for
information about how to enter text.
9.
Press [6] (ENTER).
This displays “Sure?”
• The message “Replace?” will appear if there is already
data with the same name on the USB flash drive. If this
happens, pressing bn [+] (YES) in step 10 below will
overwrite the existing data with the new data.
10.
Press bn [+] (YES) to save.
• To cancel the operation, press bn [–] (NO).
• Pressing bn [+] (YES) displays “Wait...” (operation in
progress). Do not perform any operation while this
message is displayed. “Complete” is displayed after
the operation is complete.
11.
To exit the operation, long-press the [4] (EXIT)
bm number key.
USB Flash Drive Operations
Data Type Sub Menu
File Name
Extension
User Tones Tone TON
User Rhythms Rhythm AC7, CKF, Z00
User Recording MltRec
MltR SMF
MRF
MID (Save only)
Registration
(Bank unit)
RegMemBk RBK
User Phrases
(Phrase set unit)
Phrs Set PHS
All the above data All Data DAL
To save Digital Keyboard data to a USB flash
drive
CTX5000_3000_EN.book 121 ページ ２０１８年２月２６日 月曜日 午後３時５６分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
