EN-91
Using the MIDI Recorder to Record
Recording can be stared from either of the modes below.
● Rhythm Mode
Press 8 RECORD/STOP and then play something on the
keyboard to start recording. This makes it quick and easy to
start recording to the system track.
● Song Bank Mode
After first selecting a recording destination song number,
press 8 RECORD/STOP to start recording.
Note that what happens when you press 8 RECORD/
STOP depends on which of the above modes you are in. Try
performing the operations below before you start to record.
1.
Press 6 RHYTHM to enter the Rhythm Mode.
2.
Press 8 RECORD/STOP.
This enters recording standby and causes the
[RECORD] indicator to flash.
• You can select a rhythm and tone.
• Recording starts when you play something on the
keyboard. Pressing ck START/STOP starts the
rhythm and recording at the same time.
3.
Long-press 8 RECORD/STOP.
This displays the recording setting screen and displays
“RecTrkSy”.
The [RECORD] indicator continues to flash.
• Pressing ck START/STOP starts recording, but does
not start rhythm play. Use this method to start
recording when you want to insert rests at the
beginning.
• On this screen, you can configure recording settings,
such as the recording destination track, etc.
4.
Press 8 RECORD/STOP.
This returns to recording standby.
5.
To exit recording standby, press 8 RECORD/
STOP.
This causes the [RECORD] indicator to disappear.
• Recording using this operation automatically selects
the lowest song number (31 to 40) that does not have
anything recorded to it yet as the recording
destination.
1.
Press 7 SONG BANK to enter the Song Bank
Mode.
2.
Use the bm number keys, bn [–] and [+], or the
bl dial to select a song number from 31 to 40
(user recording).
3.
Press 8 RECORD/STOP.
This displays the recording setting screen and displays
“RecTrkSy”.
• This is the same display as the one that appears on
step 3 under “When starting from the Rhythm Mode”
above.
4.
Press 8 RECORD/STOP again.
This enters recording standby.
• This is the same display as the one that appears on
step 2 under “When starting from the Rhythm Mode”
above.
• Here, long-press 8 RECORD/STOP to return to the
recording setting screen.
5.
To exit recording standby, press 8 RECORD/
STOP again.
This causes the [RECORD] indicator to disappear.
Starting a Recording
When starting from the Rhythm Mode
When starting from the Song Bank Mode
CTX5000_3000_EN.book 91 ページ ２０１８年２月２６日 月曜日 午後３時５６分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
