Casio CT-X3000 User Manual

EN-11
Your Digital Keyboard outputs audio from its built-in speakers
and/or the PHONES jack. (CT-X5000: Also outputs audio
from the LINE OUT jacks.)
• There will be an indicator mark next to [SPEAKER] while
built-in speaker output is enabled.
• There will be no indicator mark next to [SPEAKER] while
built-in speaker output is disabled.
Built-in speaker output is disabled in the cases described
below.
– When there is a plug in the PHONES jack.*
– When the following setting is disabled (Off): Speakers
(Speaker) 3 Speaker on/off (Enabled) (page EN-117).
• The Digital Keyboard automatically adjusts the sound to
make it suitable for headphones (or, in the case of the CT-
X5000, the LINE OUT jacks) while speaker output is
disabled, and for speakers while speaker output is enabled.
* When the following setting is disabled (Off): Speakers
(Speaker) 3 Enabled when PHONES connected
(PhoneSpk) (page EN-117).
• If there is no sound output even though there is an
indicator mark next to [SPEAKER], check the current
settings of the 2 VOLUME knob and/or volume
related settings.
Perform the procedure under “To configure function settings
with the bk FUNCTION button” (page EN-112) and configure
the following setting: Speakers (Speaker) 3 Speaker on/off
(Enabled) (page EN-117).
Perform the procedure under “To configure function settings
with the bk FUNCTION button” (page EN-112) and enable
the following setting: Speakers (Speaker) 3 Enabled when
PHONES connected (PhoneSpk) (page EN-117). This will
leave speaker output enabled even if there is a plug in the
PHONES jack.
Using headphones normally cuts off* output from the built-in
speakers, which means you can practice playing even late at
night without disturbing others.
* When the following setting is disabled (Off): Speakers
(Speaker) 3 Enabled when PHONES connected
(PhoneSpk) (page EN-117).
• Before connecting headphones, be sure to use
2 VOLUME to turn the volume down to a low level.
After connecting, you can adjust the volume to the
level you want.
• Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when removing the headphones.
• Headphones do not come with the Digital Keyboard. Use
commercially available headphones. See page EN-3 for
information about options.
Connecting to Audio
Equipment
Digital Keyboard Audio Output
To enable and disable speaker output
To output from the speakers while
headphones are connected
Lights
Using Headphones
fk PHONES jack
(Stereo standard jack (6.3mm))
CTX5000_3000_EN.book 11 ページ ２０１８年２月２６日 月曜日 午後３時５６分

Casio CT-X3000 Specifications

General

MIDI-keyboard number of keys	61 keys
Metronome	Yes
Product color	Black, White
Sound effects	Chorus, Delay, Reverberation
Maximum polyphony (notes)	64
Display type	LCD
Interface	USB
Headphone outputs	1
Battery type	D
Input voltage	12 V
Power source type	AC, Battery
Number of batteries supported	6

Weight and Dimensions

Depth	384 mm
Width	948 mm
Height	116 mm
Weight	6900 g