Casio CT-X3000

Using the MIDI Recorder to Record
EN-104
1. Perform the procedure under “To enter the
Song Editing Mode” (page EN-99).
2. Use the [1] (V) and [3] (W) bm number keys
to display “Trk Meas”, and then press [6]
(ENTER).
This displays “Quantize”.
3. Use the [1] (V) and [3] (W) keys to display
“Clear”, and then press [6] (ENTER).
This displays “Trk Sy”
4. Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays “Point A”.
5. Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to delete, and then press [6] (ENTER).
This displays “Point B”.
6. Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to delete, and then press [6] (ENTER).
This displays “Sure?”
7. Perform the procedure under “To exit the Song
Editing Mode operation” (page EN-99).
1. Perform the procedure under “To enter the
Song Editing Mode” (page EN-99).
2. Use the [1] (V) and [3] (W) bm number keys
to display “Trk Meas”, and then press [6]
(ENTER).
This displays “Quantize”.
3. Use the [1] (V) and [3] (W) keys to display
“Copy”, and then press [6] (ENTER).
This displays “Trk Sy”
4. Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays “Point A”.
5. Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to copy, and then press [6] (ENTER).
This displays “Point B”.
6. Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to copy, and then press [6] (ENTER).
This displays “DstPoint”.
7. Use bn [–] and [+], or the bl dial to select the
number of the first measure of the copy
destination, and then press [6] (ENTER).
This displays “Sure?”
8. Perform the procedure under “To exit the Song
Editing Mode operation” (page EN-99).
To delete a specified track in measure units To copy a specified track in measure units
and insert them into a specified location of
the same track
CTX5000_3000_EN.book 104 ページ ２０１８年２月２６日 月曜日 午後３時５６分