EN-107
Using the MIDI Recorder to Record
Y Tone Number Events
(1) Use the [2] (w) and [5] (q) bm number keys to
display “Tone” (Tone Number Event).
(2) If you want to check the name of the tone assigned to
the event, press bk FUNCTION.
• This displays the tone name. If you want to leave
the tone name displayed while changing the tone
number, go to step (3).
•Press bk FUNCTION again to return to the
“Tone” display.
(3) Use bn [–] and [+] or the bl dial to change the tone
number.
• To jump between categories, hold down
4 CATEGORY and press bn [–] (first tone in the
previous category) or [+] (first tone in the next
category).
Y Rhythm Number Event (System Track Only)
(1) Use the [2] (w) and [5] (q) bm number keys to
display “Rhythm” (Rhythm Number Event).
(2) If you want to check the name of the rhythm
assigned to the event, press bk FUNCTION.
• This displays the rhythm name. If you want to
leave the rhythm name displayed while changing
the rhythm number, go to step (3).
•Press bk FUNCTION again to return to the
“Rhythm” display.
(3) Use bn [–] and [+] or the bl dial to change the
rhythm number.
• To jump between categories, hold down
4 CATEGORY and press bn [–] (first rhythm in
the previous category) or [+] (first rhythm in the
next category).
Y Chord Event (System Track Only)
(1) Use the [2] (w) and [5] (q) bm number keys to
display a chord event.
(2) If there is no [ACCOMP] indicator displayed, press
cm ACCOMP to display it.
(3) Play the chord you want on the accompaniment
keyboard.
• This changes the chord type to the chord you play.
• For details about chord fingering modes, see
“Changing Accompaniment Keyboard Settings”
(page EN-48).
6.
To exit the event editing operation, press the
[4] (EXIT) bm number key.
7.
To exit the Song Editing Mode, long-press the
[4] (EXIT) bm number key again.
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-99).
2.
Perform steps 2 and 3 under “To edit an event”
(page EN-106).
3.
Use the [2] (w) and [5] (q) bm number keys to
display the event you want to delete.
4.
Press the [9] (DELETE) bm number key.
• This deletes the displayed event.
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-99).
2.
Perform steps 2 and 3 under “To edit an event”
(page EN-106).
3.
Press cs REGISTRATION [8] (EDIT MENU).
4.
Use the [1] (V) and [3] (W) bm number keys
to display “KeyShift”, and then press [6]
(ENTER).
5.
Perform steps 5 through 9 under “To key shift
a specified track in measure units” (page
EN-103).
To delete an event
To key shift events in measure units
CTX5000_3000_EN.book 107 ページ ２０１８年２月２６日 月曜日 午後３時５６分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
