Casio CT-X3000 User Manual

Using Phrase Pads
EN-60
1. Use the procedure under “To enter the Phrase
Editing mode” (page EN-59) to enter the Phrase
Editing mode.
2. Use the [1] (V) and [3] (W) bm number keys
to display “Copy”, and then press [6] (ENTER).
This displays “Src Set”.
3. Use bn [–] and [+] or the bl dial to specify the
number of the phrase set that contains copy
source phrase, and then press [6] (ENTER).
This displays “Src Phr” and causes the [P1] indicator to
appear.
4. Use bn [–] and [+] or the bl dial to specify the
copy source phrase number, and then press [6]
(ENTER).
This displays “Dst Phr” and causes the [P1] indicator to
flash on the display.
5. Use bn [–] and [+] or the bl dial to select the
copy destination phrase number, and then
press [6] (ENTER).
This displays “Sure?”
6. Press bn [+] (YES) to execute or bn [–] (NO) to
cancel.
• Pressing bn [+] (YES) displays the message “Wait...”
(operation in progress). Do not perform any operation
while this message is displayed. “Complete” is
displayed after the operation is complete.
7. To exit the operation, long-press the [4] (EXIT)
bm number key.
1. Use the procedure under “To enter the Phrase
Editing mode” (page EN-59) to enter the Phrase
Editing mode.
2. Use the [1] (V) and [3] (W) bm number keys
to display “Other Clr”, and then press [6]
(ENTER).
This displays “Phrase” and causes the [P1] indicator to
flash on the display.
3. Use bn [–] and [+] or the bl dial to specify the
phrase whose data (except for note events)
you want to delete, and then press [6] (ENTER).
This displays “Sure?”
4. Press bn [+] (YES) to execute or bn [–] (NO) to
cancel.
• Pressing bn [+] (YES) displays the message “Wait...”
(operation in progress). Do not perform any operation
while this message is displayed. “Complete” is
displayed after the operation is complete.
5. To exit the operation, long-press the [4] (EXIT)
bm number key.
To copy a phrase To delete all data from a phrase except note
events
CTX5000_3000_EN.book 60 ページ ２０１８年２月２６日 月曜日 午後３時５６分

Casio CT-X3000 Specifications

General

MIDI-keyboard number of keys	61 keys
Metronome	Yes
Product color	Black, White
Sound effects	Chorus, Delay, Reverberation
Maximum polyphony (notes)	64
Display type	LCD
Interface	USB
Headphone outputs	1
Battery type	D
Input voltage	12 V
Power source type	AC, Battery
Number of batteries supported	6

Weight and Dimensions

Depth	384 mm
Width	948 mm
Height	116 mm
Weight	6900 g