203
Schemes Tab
Figure 3-89
P
ower Schemes
This pull-down menu is to choose the power source from either “Battery Power” or “AC Power”.
Switch state to User Idle
This pull-down menu is to set up a time period until when the terminal changes its state to User
idle.
Switch state to Sy
stem idle
This pull-down menu is to set up a time period until when the terminal changes its state to System
idle.
Switch state to S
uspend
This pull-down menu is to set up a time period until when the terminal changes its state to
Suspend. The selection will be disabled if the power source is set to “AC Power”.
A time period until when the Auto Power OFF function is performed is a sum of time periods of
Switch state to U
ser Idle, Switch state to System idle and Switch state to Suspend.
The minimum time period is 3 minutes.
To Next Page
Loading...
