185
System Tab
This tab is to set up a time period of the APO (Automatic Power OFF) function to activate and
“Enable” or “Disable” for turning on the terminal with the Trigger key.
Figure 3-65
Scanner APO
This filed is to set up a time period in the range of 0 to 1800 (in second) for the APO function to
activate. Setting “0” will disable the function.
Power up device with trigger key
This checkbox is to set “Turning ON the terminal with the Trigger key” effect. With a check mark
in the checkbox, the power on the terminal can be turned on when one of the Trigger keys is
pressed down.
To Next Page
Loading...
Need help?
General
