132
2.7.10 Temperature Control
If temperature rise is detected in the terminal when running at the highest clock frequency (under
such the condition that the CPU speed at “TURBO”, the integrated WLAN module in active mode,
etc.), a warning message stating that “An error occurs !! Original reference cannot be found”
appears and the power is turned off to protect the integrated devices in the terminal.
Figure 2-17
Either turn off the power and leave the terminal unused for a while or move it to a location where
the surrounding air temperature is cooler.
If power is turned off due to the temperature limit, a warning message stating “An error occurs !!
Original reference cannot be found” appears when the power is turned on a next time.
Figure 2-18
To Next Page
Loading...
