Casio DT-X8 Series - Page 43

43
The functions of the Laser Scanner Library relevant to the Scanning Parameters are as follows.
OBRSetScanningCode
: Sets up scanning with individual bar code
symbology.
OBRGetScanningCode
: Retrieves scanning status with individual bar code
symbology.
OBRSetCode39Option
: Sets up scanning with Code39 symbology.
OBRGetCode39Option
: Retrieves decode options of Code39 symbology.
OBRSetNW7Option
: Sets up scanning with NW-7 symbology.
OBRSetNW7OptionEx
: Sets up scanning with NW-7 symbology.
OBRGetNW7Option
: Retrieves decode options of NW-7 symbology.
OBRSetWPCAddonOption
: Sets up scanning with WPC Addon symbology.
OBRSetWPCAddonOptionEx
: Sets up scanning with WPC Addon symbology.
OBRGetWPCAddonOption
: Retrieves decode options of WPC Addon
symbology.
OBRSetWPCOption
: Sets up scanning with WPC symbology.
OBRSetWPCOptionEx
: Sets up scanning with WPC symbology.
OBRGetWPCOption
: Retrieves decode options of WPC symbology.
OBRSetUPCEAddonOption
: Sets up scanning with UPC-E Addon symbology.
OBRSetUPCEAddonOptionEx
: Sets up scanning with UPC-E Addon symbology.
OBRGetUPCEAddonOption
: Retrieves decode options of UPC-E Addon
symbology.
OBRSetUPCEOption
: Sets up scanning with UPC-E symbology.
OBRSetUPCEOptionEx
: Sets up scanning with UPC-E symbology.
OBRGetUPCEOption
: Retrieves decode options of UPC-E symbology.
OBRSetIDFOption
: Sets up scanning with Industrial 2of5 symbology.
OBRGetIDFOption
: Retrieves decode options of Industrial 2of5
symbology.
OBRSetITFOption
: Sets up scanning with ITF (Interleaved 2of5)
symbology.
OBRGetITFOption
:
Retrieves decode options of ITF (Interleaved 2of5)
sym
bology.
OBRSetCode93Option
: Sets up scanning with Code93 symbology.
OBRGetCode93Option
: Retrieves decode options of Code93 symbology.
OBRSetCode128Option
: Sets up scanning with Code128 symbology.
OBRGetCode128Option
: Retrieves decode options of Code128 symbology.
OBRSetMSIOption
: Sets up scanning with MSI symbology.
OBRGetMSIOption
: Retrieves decode options of MSI symbology.
OBRSetIATAOption
: Sets up scanning with IATA symbology.
OBRGetIATAOption
: Retrieves decode options of IATA symbology.
OBRSetRSS14Option
: Sets up scanning with RSS-14 symbology.
OBRGetRSS14Option
: Retrieves decode options of RSS-14 Stacked
symbology.
OBRSetRSSLimitedOption
: Sets up scanning with RSS Limited symbology.
OBRGetRSSLimitedOption
: Retrieves decode options of RSS Limited
symbology.
OBRSetRSSExpandedOption
: Sets up scanning with RSS Expanded symbology.