Casio DT-X8 Series - Page 48

48
Table 2.27 WPC symbology
F Country flag
M Manufacturer code
N Product code
S Number system character
A Addon data
T Termination code
C Mod10 check digit
Table 2.28 Code39 symbology
A ASCII conversion post data
B ASCII conversion pre-data
C Mod43 check digit. Becomes data if there is no check digit attached.
S Start and stop characters
Table 2.29 NW7 symbology
S Start and stop characters (any one of a, b, c and d)
D Data
C Mod16 check digit. Becomes data if there is no check digit attached.
Table 2.30 Interleaved 2of5 symbology
D Data
C Mod10 check digit. Becomes data if there is no check digit attached.
Table 2.31 Industrial 2of5 symbology
D Data
C Mod10 check digit. Becomes data if there is no check digit attached.
Table 2.32 Code93 symbology
A ASCII conversion post data
B ASCII conversion pre-data
C Mod47 check digit. Becomes data if there is no check digit attached.
S Start and stop characters
Table 2.33 Code128 symbology
A ASCII conversion post data
B ASCII conversion pre-data
Table 2.34 EAN128 symbology
C Mod47 check digit
S Start and stop characters
F Code ID (only “]C1”, EAN128)
G GS (only 1Dh, EAN128)
Table 2.35 MSI symbology
D Data
C Mo10 and Mod11 check digits. Becomes data when there is no check digit attached.