117
ADVANCED SETTINGS
2. When the image is focused, press the shutter
button the rest of the way to shoot.
IMPORTANT!
• During movie recording, the Auto Focus mode is disabled.
NOT
• When proper focusing is not possible because the subject
is closer than the Auto Focus range, the camera will switch
to the Macro Focus range automatically (Auto Macro).
• Whenever you perform an optical zoom operation while
shooting with Auto Focus, a value will appear on the
monitor screen as shown below to tell you the focus range.
Example: cm –
* will be replaced by the actual focus range value.
Using Macro Focus
1.
Half-press the shutter button to focus the
image.
The focus operation is the same as that for Auto Focus.
2. When the image is focused, press the shutter
button the rest of the way to shoot.
IMPORTANT!
• Use of the flash along with Macro Focus can cause the light
of the flash to become blocked, which can produce
unwanted lens shadows in your image.
• Macro Focus becomes fixed focus while shooting a movie.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
