76
SHOOTING A SNAPSHOT
With the self-timer, pressing the shutter button starts a timer,
and the shutter is released and the image is shot after a fixed
amount of time.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Self-timer” and then
press [X].
3. Use [S] and [T] to
select the self-timer
type and then press
[SET].
This causes an indicator
identifying the selected self-
timer type to appear on the
monitor screen.
4. Press the shutter button to shoot.
NOT
• You can use the Operation Panel (page 53) to change the
self-timer setting in the movie mode only.
Using the Self-Timer
Self-Timer Type Description
10 sec 10-second self-timer
2 sec
2-second self-timer
• When shooting under conditions that
slow down the shutter speed, you can
use this setting to prevent blur due to
hand movement.
X3
(Triple Self-timer)
This option shoots three images: one
image 10 seconds after the shutter button
is pressed, the next image one second
after the camera gets ready to shoot after
the first image, and the final image one
second after the camera gets ready to
shoot after the second image.
Off Self-timer is disabled.
10
s
2
s
x3
To Next Page
Loading...
Need help?
General
Weight and Dimensions
