83
SHOOTING A SNAPSHOT
Performing a face recognition recording
operation (Normal Mode)
1.
In the REC mode, press [SET].
2. Use [S] and [T] to
select the third option
from the top in the
operation panel (Face
Recognition).
3. Use [W] and [X] to select “ Face Detection:
Normal” and then press [SET].
4. Point the camera at the
subjects.
The camera will detect the
faces of any people in the
image. The detected faces all
will be bounded by frames
after detection is complete.
5. Half-press the shutter button.
The focus frame of the face that is focused becomes green.
6. When you are ready to shoot, press the
shutter button the rest of the way.
The camera will adjust its settings so the framed faces are
of proper brightness.
NOT
• Half pressing the shutter button to perform face recognition
while “ (Tracking)” (page 119) is selected for the AF
area will cause the focus frame to follow the movement of
the face.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
