169
EDITING IMAGES
Use the following procedure to adjust the brightness of
snapshots.
1. In the PLAY mode, use [W] and [X] to scroll
through images and display the one whose
brightness you want to adjust.
2. Press [MENU].
3. Select the “PLAY” tab, select “Brightness”,
and then press [X].
• Note that the above step is possible only when there is a
snapshot displayed on the monitor screen.
4. Use [S] and [T] to select the setting you want,
and then press [SET].
• To cancel the brightness adjustment operation, press [W]
or [MENU].
IMPORTANT!
• Adjusting the brightness of an image creates a new image
with the new brightness level. The original image also
remains in memory.
• When you display a brightness adjusted image on the
camera’s monitor screen, the date and time indicates when
the image was originally recorded, not when the brightness
was adjusted.
Adjusting Image Brightness
To get this: Select this setting:
Brighter
Darker
+2
+1
0
–1
–2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
