VIEWING IMAGES ON A COMPUTER
224
• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable
plugs are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.
7.
Connect the USB cable that comes bundled
with the camera to the USB cradle and your
computer’s USB port.
8.
Press the camera’s power button to turn it on,
and then press its [MENU] button.
9.
Select the “Set Up” tab, select “USB”, and
then press [왘].
10.
Use [왖] and [왔] to select “Mass Storage (USB
DIRECT-PRINT)”, and then press [SET].
11.
Turn off the camera.
USB port
Connector A
USB cable
(bundled)
[ ] (USB port)
Connector B
To Next Page
Loading...
Need help?
General
