Need help?Do you have a question about the Cass Technology CASTLE S SERIES and is the answer not in the manual?
General| Brand | Cass Technology |
|---|---|
| Model | CASTLE S SERIES |
| Category | Controller |
| Language | English |
Main processing unit housing CPU, LCD, and keypad for system control and validation functions.
Device for reading access cards and inputting Personal Identification Numbers (PINs) for enhanced security.
Card encoded with User Card Number and Facility Code, used for user identification and site differentiation.
Controller validates card information, checks installation and time zone, and grants or rejects door access.
Procedure to access programming mode by pressing any key, requiring a 6-digit password with three access levels.
Configuration of the system's current date and time, essential for time-based access control functions.
Configuration of door-specific parameters including lock release, open time, and location codes for access control.
Defines time periods for access control, linking TimeSets to days of the week and holidays.
Assigns access permissions and expiry dates to card users for specific doors and time zones.
System-wide settings like lock-out mode, expiry checking, anti-passback, and PIN configurations.
Process for adding new access cards to the controller's database, including setting access level.
Function to remove user cards from the controller's database by entering the card number.
Manually arms or disarms the sensor system, with options for local alarm delay and arming delay.
Allows users to change their programming password, respecting their access level.
To Next Page