CASTLE S SERIES CONTROLLER – TECHNICAL OPERATION GUIDE
Setting Holidays
Press ‘3’ to select [3-Holiday] menu from the System Menu.
This menu item sets the Holidays database. There are two types of holidays, Holiday_1 and
Holiday_2. Holiday_1 is higher priority than Holiday_2. That’s mean Holiday_1 will be taken into
consideration by the controller rather than Holiday_2.
When user select this menu, controller will prompt the user to choose which type of holiday they
want.
The controller lets you enter up to 30 dates of holidays in each Holiday1 and Holiday2.
User has to press ‘1’ or ‘2’ to select Holiday_1 or Holiday_2.
After the selecting, the controller will display the first holiday date as in the following: -
MM => month
DD => day
Digits in the ( ) bracket are under focus.
Use the ‘0’ to ‘9’ keys and the ‘ENT’ to enter the month of the holiday followed by the day. Press
the ‘ENT’ key to accept the date and the display will show the next holiday date.
Continue until all the holidays have been entered. There are total of 30 holiday dates in each Holiday
setting, which can be entered. To clear a holiday, enter ‘00’ for both month and day entries.
CASS TECHNOLOGY SDN BHD(338857-X) 20