CASTLE S SERIES CONTROLLER – TECHNICAL OPERATION GUIDE
Readers Status
Press ‘5’ select [5-Rd Stat] menu from the Test Menu.
Then the controller will display the following: -
User has to key in ‘1’ or ‘2’ to select the Bus number.
Example:
A user chooses Bus number 2. Then the controller will display the following: -
u= Reader is working properly
d= Reader is not working properly
This menu item is let the user to view the Readers status. It will show all the reader that
connected to Bus 2 in Up or Down conditions.
Return to Main Menu
Press ‘0’ to select [0-Main] menu from then Test Menu.
This menu item is to return to the Maintenance Menu.
CASS TECHNOLOGY SDN BHD(338857-X) 37
To Next Page
Loading...