Cass Technology CASTLE S SERIES - Chapter 8 - Maintenance Menu; Changing Programming Password

CASTLE S SERIES CONTROLLER – TECHNICAL OPERATION GUIDE
Chapter 8 – Maintenance Menu
Under Maintenance Menu, user can change the Programming Password, set Display Message
and Testing such as Test Keypad, Test WatchDog, Test Input and Test Output.
To enter this menu, press the ‘5’ key at the Main Menu.
The following will be displayed: -
CASS TECHNOLOGY SDN BHD(338857-X) 34
Maintenance
Change Password
Set String
Test
Return to Main Menu
Test Input
Test Output
Test Keypad
Return to Main Menu
Test WatchDog
dd/mm DDD hh:mm:ss
1-CH Pass 2-Set Str
dd/mm DDD hh:mm:ss
2-Set Str 3-Test
dd/mm DDD hh:mm:ss
3-Test 0-Main
Reader Status